Introducing the JBS DSG Stage 1 for the DQ200 (7 Speed, Dry Clutch) Gearbox. An upgrade that not only complements our full Custom Calibrated Stage 1 and Stage 2 software, but one which can also be utilised on a completely standard car.

Features:

• Torque Limit Increase:
  Being a dry clutch gearbox it is not possible to increase the clutch pressures on these gearboxes, however we do still raise the torque limit. This allows the DSG gearbox to correctly inerpret the torque from the ECU, applying the correct disengagement pressure and timing on shifts, reducing the strain on the clutches.
  With this performance program, the DSG computer will no longer initiate steps to dissipate engine torque when the factory limit is reached, which unleashes the true benefits of any engine modifications.
• Increased Shift Response:
  The shift response has been increased by up to 20% giving a smoother transition, leading to a decrease in unnecessary clutch slippage under full load accelerations, which reduces clutch wear.
  With increased shift time you also get an improved paddle-reaction-time by up to 40% in M-mode.
• Increased Redline and Shift Points:
  Increasing the shift points gives you the command of your engine's power in the upper RPM range, we have raised the DSG transmission's rev limit and therefore the automatic shift points to 7000 rpm in S-mode and 6800 in D-mode, as this optimizes the engine's performance range and maintains the safe operating range of the valve springs.
• Automatic Shifting :
  With our performance programming, we have put the driver back in complete control.
  When you opt to over ride S-mode with the paddles, at wide open throttle the software will automatically shift at the newly defined red line. Up to 95% load, you will have the benefit of the removed automatic up-shifting and kick-down to take control over your gear changes. This change to S-Mode is allows you to drive in the high or low gears at low speed, without the revs jumping up or trying to change down and hold a high rpm.
  In D mode, the factory up-shift and kick-down settings are maintained.
• Launch Control:
  With the JBS DSG Software, launch control can be activated on any vehicle that did not come equipped with a factory launch setting.
  A perfect launch is accompanied with a great 0-60 acceleration and is one of the best ways to show off your performance mods. Furthermore, the launch control also activates a type of anti-lag, and has a safety built in that will only let you perform this function when the gearbox is upto full operating temperature.

Please Note:

Not all specifications listed are applicable to every variation of the DQ200 DSG gearbox, although the majority of functions (Raised RPM, Raised Shift Points, Raised Torque and Faster Shift times) are retained.

Approximate Install Time: 1.0 Hours

A member of the JBS team will be in touch to arrange an install date upon completion of the purchase.